There are currently three products in the Spedian™ changeable graphic range. Spedian™, SuperLite™ and SpediFlex™ . Spedian™ is the original system developed for rigid sided trucks. SuperLite™ is the unique changeable system for the recess panels of vans. SpediFlex™ is the unique system for ‘up and over’ rear slatted doors of vans and articulated trailers.
FREQUENTLY ASKED QUESTIONS
Frequently Asked Questions about Spedian
What are the Spedian™systems?
What is Spedian™?
Spedian™ is the only changeable truck graphics system in the world with no visible frame. It is also the lightest. It is currently being used by major global companies as well as small and medium sized businesses and Local Authorities throughout the UK and North America.
Is it better that the alloy and plastic frame systems?
Yes. It is much lighter and graphics are larger because you do not have an unsightly frame. When the alloy frames are damaged, the replacement time, cost and inconvenience caused can interrupt the functionality of the truck.
Does Spedian™ require a lot of maintenance?
The Spedian System™ is totally maintenance free, unlike visible plastic and metal frames!
Can you see the frame?
No. the system works on a male, SpediGrip, to female, SpediLoop, basis with the male being on the vehicle perimeter and the female on the banner perimeter. The SpediGrip can be supplied to match your trucks corporate colours.
How does Spedian work?
Simply. We developed the Spedian Exhaust System™ which works on a high pressure/low pressure principal. Once the advertising banners are installed they are maintenance free having been tensioned at the time of installation. The installation time is short, maximum of two hours for a 53 foot semi-trailer truck and you can drive away immediately after installation. In the USA we have tested the Spedian™ System products at the Transportation Research Center (TRC) at Columbus Ohio in the USA.
Does the system need re-tensioning?
No. Unlike frame systems that are affected by wind drag and eventually wrinkle, Spedian™ needs no further tensioning after installation.
How flexible is Spedian™?
The Spedian™ Systems are designed to fit most trucks. Spedian™ is used on rigid sided trucks of all sizes by major brands and over 100 local authorities and waste management companies in the UK the graphic advertising banners are changeable and are frequently reused. Spedian is easliy installed on solid rear doors.
Does Spedian™ bend and twist?
Absolutely not. Unlike ridged frame systems, the Spedian system will conform to the natural twisting and movement of the truck body.
How light is Spedian™?
No more than 35 ounces.
Does the Spedian System™ affect fuel consumption?
No. The unique Spedian System™ sits close to the truck side through a ‘vacuum’ effect based on high and low pressure caused by airflow and the Spedian Exhaust System™
World beating SpediLite
SpediLite is the only changeable and reusable graphic system for the window recess panels of vans. The frame is very light weighing only 5 ounces for a transit van on two sides and a rear. Although the frame has an extremely strong bond, safety tested at TRC Ohio ,we have developed a tool that can remove the frame with ho damage to original manufacturers paintwork.
Rear door solution-SpediFlex
Up and over rear doors are a logistics team nightmare, the take a while to fit and remove. If you use SpediFlex the install time is down to tenminutes and removal under five! And you can reuse the advertising banners making the rears a very powerful marketing platform and a dream for the logistics team!